NORESTER 6280 WHITE *Fire rated EN-45545, M1F0, EN13501-1

Description

• NORESTER 6280 WHITEProduct description
  NORESTER 6280 is an ortho DCPD laminating resin specially designed for fire resistance. It is recommended to produce
  laminates by hand layup or in compaction. It is thixotropic, pre-accelerated, charged, and white. This resin does not contain
  halogen and antimony. It has very good fibre wetting and impregnation properties. It reduces styrene emissions during
  application.Certificates
  HL2 R1-R7-R17 (ép 4mm) EN 45545 GEL COAT 888
  M1F0 (ép 4mm) NF16-101 GEL COAT 888 Bs2D0 according to the norms EN 13501  for the following products: (GEL COAT 888 / NORESTER 6280)
• Physical Properties of Uncured Resin
  Brookfield Viscosity at 23°C-sp4-cPoise- 5rpm ISO 2555 2000 – 3000
  Specific gravity at 23°C ICON012 1.69 – 1.71
  Solid Content – % ICON003 77 – 81
  Storage stability 20°C- months – 2Reactivity
  Gel time at 23°C
  1 % MEKP (M50) on 150g – minutes
  30

  Viscosity & gel time versions available
  NA 30 50 – –
  TA X √ √ X X

  Mechanical properties of cured resin*
  Flexural Strength ISO 178 33 MPa
  Tensile Strength ISO 527 14 GPa
  Elongation at Break ISO 527 0.53 %
  Heat Deflection Temperature -HDT ISO 75-2 70 °C
  Barcol Hardness ASTM 2583 45-50
  * To catalyse at 1% of MEKP- post cured 3h@80°C

  Application & Specifics

• Recommendations before use Application temperature between 18-25°C.
  Homogenize the product.
  Recommendations during use
  1 – 2% Methyl Ethyl Ketone Peroxide (MEKP).
  Mix the catalyst well.
  Never mix accelerator and catalyst together.
  Post Curing 24h at room temperature (16-20°C) then 16h at 40°C
  for optimal properties.
  Certificate
  The resin is classified according to the certificate
  named here above and according to the application in
  our laboratory. It is the responsibility of the customer
  to assure that the mould realised by himself is well
  classified.Storage
  The product must be stored in its original closed packaging at a temperature between 15°C and 25°C, away from direct
  sunlight.
  It is the responsibility of the customer to ensure that the product is used in good conditions before the use-by date
  mentioned on the keg.
  This product is subject to the Highly Flammable Liquids Regulations.
  Please follow the MSDS of this product in order to make sure the operators wear the appropriate personal protective
  equipment during usage of the product.